I Beam Jib Crane

 

An i beam jib crane is a localized lifting system built around a rolled I-beam jib, a supporting pillar or wall bracket, and a hoist that moves along the beam. The I-beam provides a practical runway for the trolley while the slewing structure positions the load within a defined work envelope. This arrangement is suitable for short-distance lifting where a full overhead travelling crane would be unnecessary or where a dedicated lifting point is required at a machine, assembly station or service area.

KNCRANES supplies project-configured i beam jib crane solutions for industrial workshops, production lines, equipment maintenance areas and material transfer stations. The final crane is selected around the rated load, beam reach, lifting height, rotation range, operating frequency, installation surface and required control method rather than by capacity alone.

 

 

The main function of an i beam jib crane is to lift and position a load within a restricted radial area. A trolley carries the hoist along the I-beam, while the jib slews around its mounting point. The operator can therefore perform a controlled pick-and-place movement between nearby positions without using a forklift for every transfer or installing a building-wide crane system.

A typical I-beam jib crane consists of a vertical pillar or engineered wall connection, a rolled I-beam jib, trolley wheels, an electric chain hoist or other suitable hoisting unit, a slewing mechanism, power supply and control equipment. The exact arrangement depends on whether the crane is pillar mounted or wall mounted and whether slewing is manual or electrically driven.

 

 

The I-beam section is selected to provide the required stiffness and trolley travel under the intended working load. The support structure transfers vertical and horizontal forces into the foundation, wall or structural column. For this reason, the beam profile, connection details, foundation or anchoring method and hoist selection must be checked together. A product photograph or a nominal capacity alone is not sufficient to approve a crane for installation.

Pillar-mounted and wall-mounted configurations

A pillar-mounted i beam jib crane is supported by an independent vertical column and foundation. It is appropriate when a dedicated lifting point is required in an open work area and the floor can accept the foundation loads. A wall-mounted or column-mounted i beam jib crane uses an engineered bracket or connection to an existing structural member. It can preserve floor space, but the supporting structure must be verified for the combined crane loads and operating forces.

Manual and electric slewing

Manual slewing is a straightforward option for localized handling with moderate operating frequency. Electric slewing is considered when the crane is used repeatedly, when the load path requires controlled positioning, or when reducing manual pushing effort is part of the workstation objective. The selected drive, controls and slewing limits should be matched to the duty and working envelope.

 

 

Parameter	Reference information
Product type	I-beam slewing jib crane
Reference configuration	DJB-HNN style pillar-mounted slewing jib
Jib profile	Rolled I-beam section
Reference safe working load	Up to 2,000 kg, subject to final design confirmation
Reference outreach	Up to 8 m for loads below 1,000 kg, subject to final design confirmation
Reference slewing range	Up to 270° pillar mounted; up to 180° wall mounted in the supplied reference
Slewing method	Manual slewing; optional electric drive according to application
Hoisting unit	Electric hoist or other suitable hoist selected for the approved duty
Mounting	Pillar mounted or wall/column mounted, subject to structural assessment
Final parameters	Rated load, outreach, lifting height, rotation, duty and electrical data to be confirmed in the technical proposal

Important: capacity, reach, lifting height, rotation and duty are interdependent. The values above should be treated as reference information from the supplied product material. The approved rating and dimensions must be confirmed in the project-specific technical documentation.

 

 

Defined coverage

The crane serves a specific workstation or process area, making the lifting path easier to plan than ad hoc manual handling.

Efficient trolley travel

The I-beam provides a familiar and serviceable track for the hoist trolley, with travel length determined by the usable beam reach.

Flexible installation

Pillar-mounted and wall-mounted arrangements allow the crane to be matched to available floor space and building structure.

Manual or powered slewing

Manual rotation can suit simple, low-frequency handling. An electric slewing drive can be considered where repeated positioning or lower operator effort is required.

Reduced interference with other equipment

A localized jib crane can handle loads at the point of use without occupying the full runway of an overhead crane.

Application-specific engineering

Load, reach, lifting height, rotation, duty class, hoist and controls can be reviewed as one system.

 

 

An i beam jib crane is generally selected for short-distance lifting within a defined area rather than for full-building material flow. Common applications include:

• Machine loading and unloading at CNC, machining and processing stations
• Component assembly, subassembly positioning and production-line handling
• Die, mould, tooling and fixture change operations
• Workshop maintenance and replacement of motors, pumps or machine parts
• Material transfer between a workbench, pallet, rack or nearby process point
• Service stations where a dedicated lifting point is needed but a travelling crane is not justified
• Fabrication and metalworking areas requiring controlled handling of compact loads

 

 

KNCRANES integrates lifting-equipment research and development, manufacturing, sales, installation and service. The company website states that the group was founded in 2008, has supplied cranes to more than 50 countries and has completed more than 2,000 cases across various industries. For an i beam jib crane project, the technical proposal can be developed around the customer's load, reach, lifting height, rotation angle, functional requirements and site conditions.

The service scope can include design review, equipment manufacturing, installation, commissioning, maintenance guidance and spare-parts support according to the agreed project requirements. Customers may also identify preferred motors, reducers, bearings, hoists or electrical components where compatibility with an existing plant standard is required.

 

 

An i beam jib crane is a slewing jib crane that uses a rolled I-beam as the horizontal boom and trolley runway. A hoist travels along the beam while the jib rotates around a pillar or wall/column mounting point.

An I-beam jib uses a standard rolled beam section as the trolley track. A box-beam jib uses a fabricated enclosed or semi-enclosed beam. The selection depends on load, reach, trolley requirements, stiffness, available headroom, manufacturing method and the intended duty.

The supplied reference material lists a safe working load of up to 2,000 kg. The actual rating is not determined by the beam alone; it must be confirmed from the complete crane design, including support, reach, hoist, trolley, slewing structure and operating duty.

The supplied reference lists outreach up to 8 m for loads below 1,000 kg. Outreach is application-specific because increasing reach changes beam deflection, support forces and the required foundation or structural connection.

The supplied pillar-mounted reference indicates up to 270° slewing, while a wall-mounted arrangement may be designed for up to 180°. The final rotation range should account for building columns, machines, walkways, restricted zones and the selected slewing mechanism.

Yes. Manual slewing is suitable for certain localized and lower-frequency handling tasks. Where the crane is used repeatedly or loads must be positioned with less manual effort, an electric slewing drive can be evaluated.

A pillar-mounted version normally requires an engineered foundation and anchor arrangement. A wall-mounted or column-mounted version transfers forces into the supporting structure, which must be assessed before the crane is approved.

Provide the rated load, outreach, lifting height, required rotation, operating frequency, mounting location, foundation or structural details, available headroom, power supply, control preference and working environment. A layout drawing or site photograph improves the accuracy of the proposal.

 

 

To receive a project-specific proposal, submit the required load, outreach, lifting height, rotation range, operating frequency, mounting condition, power supply and site layout. KNCRANES can then assess the support arrangement and prepare an i beam jib crane configuration aligned with the actual lifting process.

 

Contact now

Hot Tags: i beam jib crane, China i beam jib crane manufacturers, suppliers, factory, 1 Ton Electric Hoist, Column Mounted Jib Crane, Jib Crane By Types, Pillar Mounted Jib Crane, Wall Bracket Jib Crane, Wall Mounted Jib Crane