Metal Sheet Vacuum Lifters For Sale
video

Metal Sheet Vacuum Lifters For Sale


Safe working load (SWL):500 kg

Lifting height:1.2 m

Lift amount:1.2 m

Intended use:Metal sheet handling and laser loading
Send Inquiry
Chat Now
Product Introduction

Product Description

 

KNCRANES HP-BSQ Metal Sheet Vacuum Lifters for Sale are specifically designed for metal sheet handling and loading onto laser cutting machines. Most of them are used to transfer the sheets from the storage pile or temporary storage area to the laser loading station within a fixed vertical travel range.

This model is an electric-free operation type. It achieves material extraction by using a single-sided suction of the suction cups on the sheets. The surface condition of the sheets is the key factor in selection: a clean sheet surface with adequate flatness is necessary to form a stable vacuum seal. If the sheet surface is oily, has holes, is deformed, has a coating, or the extraction space is narrow, the suction cup arrangement plan needs to be adjusted accordingly.

When making the plan, the extraction position, transfer route, and drop-off station should be considered simultaneously. If used in conjunction with a laser cutting machine, it is also necessary to confirm the interface of the machine tool, the clear space above the storage pile, and the overall transfer channel space in advance, and then determine the vacuum supply, control method, lifting tool and lifting mainframe connection plan. We do not simply select lifting tools based on the weight of the sheets; the sheet size, thickness, material, and the on-site placement position all need to be evaluated together.

 

 

Key Features

 

  • Face-contact vacuum lifting: Vacuum pads engage the usable surface of the sheet, allowing the lifting method to be selected around the actual pickup face rather than an edge-gripping arrangement.
  • Pad layout matched to the workpiece: Pad number, size, and spacing are determined by sheet dimensions, surface condition, available sealing area, and the way the sheet is supported during transfer.
  • No-electricity operating configuration: The listed configuration is intended to operate without electrical power. The vacuum and control arrangement remains a project-specific item.
  • Laser-loading focus: The product is intended for metal sheet transfer into laser equipment, where the machine interface and clear transfer route must be considered before selection.

 

metal sheet vacuum lifters details

 

Technical Parameters

 

Parameter

Confirmed Information

Model / reference

HP-BSQ

Safe working load (SWL)

500 kg

Lifting height

1.2 m

Lift amount

1.2 m

Intended use

Metal sheet handling and laser loading

Operating configuration

No-electricity operation

Vacuum pad quantity and size

To be confirmed for the workpiece

Vacuum source / air supply

To be confirmed for the project

Sheet size, thickness, and surface condition

To be confirmed for the project

Rotation / tilting function

To be confirmed if required

 

Typical Applications

 

  • Feeding metal sheet into a laser cutting machine.
  • Moving sheet from a staged stack to a laser-loading position.
  • Handling flat sheet that offers a usable vacuum sealing surface.
  • Positioning sheet before the next production step where the lifting route and placement point have been verified.

 

metal sheet vacuum lifters

 

FAQ

 

1. What capacity is listed for HP-BSQ?

The listed HP-BSQ configuration has a 500 kg safe working load. Final suitability still depends on the individual sheet, its surface condition, and the selected pad arrangement.

2. Is it suitable for laser cutting machine loading?

Laser loading is the stated application. The loading interface, clearance, pickup position, and route to the machine must be checked for the actual cell layout.

3. Does this vacuum lifter use electrical power?

The listed configuration is described as operating without electrical power. Confirm the vacuum source and control arrangement with KNCRANES for the final installation.

4. What sheet conditions need to be checked?

Confirm the material, dimensions, thickness, weight, surface condition, oil film, flatness, perforations, and available sealing area. These conditions determine whether and how the pad layout can be configured.

5. Are rotation or tilting functions included?

No rotation or tilting function is specified for the listed configuration. Confirm it separately if the handling route requires either function.

 

Enquiry Information

 

Please provide the following information for configuration review:

  • Sheet material, length, width, thickness, and individual sheet weight.
  • Sheet surface condition, including oil, coating, perforations, corrugation, or deformation.
  • Required pickup point, placement point, lifting height, and transfer path.
  • Laser machine model or the loading interface dimensions, where applicable.
  • Available supporting lifting equipment and proposed connection method.
  • Any requested rotation, tilting, or special pickup orientation.
  • Site clearance and installation constraints around the handling area.

Hot Tags: metal sheet vacuum lifters for sale, China metal sheet vacuum lifters for sale manufacturers, suppliers, factory, Circular Lifting Magnets, Excavator Electromagnet, Excavator Grab Bucket, Excavator Lifting Magnet, Magnet By Types, Round Lifting Electromagnet

Send Inquiry

whatsapp

Phone

E-mail

Inquiry