5 Ton Lifting Magnet
5 Ton Lifting Magnet
5 Ton Lifting Magnet

5 Ton Lifting Magnet

Send Inquiry

Chat Now

Product Introduction

magnet

Products Description

Electric lifting magnet used on excavator or crane, for sorting out steel scraps, is also referred as excavator magnet, or scrap magnet, scrap handling magnet, scrap yard magnet, junkyard magnet. They could be round, circular or rectangular.
1.Duty cycle 75% with high opeation frequency.The working efficiency and opeation speed have greatly improved comparing with the stand series.
2.It adopts the control mode of strong excitation(DC-220V),which carinmprove the lifting capacity.
3.Large-sized electromagnet can adopt the control mode ofover excitation(DC-290V/DC-290V),which can increase the current speed and play stronger lifting capacity.

Technical Sheet

magnet drawing

Model	Electric current (A)	Cold-state power (kw)	lifting capacity (kg) cold/hot state		Mass (kg)	Overall dimension (mm)
Model	Electric current (A)	Cold-state power (kw)	cast iron	steel scrap	Mass (kg)	A	B	C	D	E	F
MW61-180160L/1-75	113/78	32.7/15.5	2550/2000	1150/900	5000	1800	1600	1500	310	210	60
MW61-200150L/1-75	110/76	31.9/15.2	2200/1900	1000/800	4200	2000	1500	1300	250	180	70
MW61-200180L/1-75	142/108	41.2/23.8	2300/1900	1100/900	4500	2000	1800	1400	400	240	70
MW61-250150L/1-75	198/150	57.4/33	4000/3000	2000/1600	5000	2500	1500	1700	300	210	60
MW61-250180L/1-75	238/181	69.02/39.82	4500/3000	2200/1600	9000	2500	1800	1700	180	110	55
MW61-250200L/1-75	179/123	51.9/24.5	5000/4200	2500/1800	8400	2500	2000	2000	390	280	80
MW61-300150L/1-75	195/135	56.6/27	2400/2850	1500/1250	5700	3000	1500	1570	310	210	60
MW61-300180L/1-75	198.6/150	57.6/33	3500/2850	1600/1300	7500	3000	1800	1570	400	250	80
MW61-300200L/1-75	207/157.1	60/34.5	4000/3500	2500/2000	10500	3000	2000	1800	400	250	80
MW61-350220L/1-75	254.4/193	7308/42.5	7000/6000	3500/3000	12000	3500	2200	1955	400	300	80
MW61-360180L/1-75	240/180	69.6/39.6	5000/3500	2500/2000	11000	3600	1800	1955	400	250	80
MW61-400150L/1-75	182/138	52.8/30.4	4000/3500	2500/2000	8500	4000	1500	2350	410	260	80

Product Detailed

magnet detailed

Mechanism
1. Box-type shaped by wielding;
2. High quality carbon steel Q235B and Q345B;
3. The girder connected by high strength screws;
4. Welding seams are tested by X-ray and ultrasound;
5. Forged wheels;
6. Compact structure, small volume and light weight trolley;
7. Lifting mechanism is open type winch trolley;
8. Compact reducer motor drive, step less control, hardened gears and safety disc brake;
9. Good operation performance, step less speed regulating and running smoothly;
10. Main girders Shot blasting sa2.5 after welding to release internal stresses;
11. Painting high quality epoxy zinc-rich primer, and the thickness of oil film is 140μm;

Electric System
1. Power supply through step less slide lines;
2. Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time;
3. Control panel protection degree is IP54;
4. Reasonable components installation, convenient for check and maintenance;
5. Electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel;

Safety Protection Devices
Overload limiter, limit switch (lifting and traveling), interlocking protection devices, buffer, track sweep plate, shield, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.