Crane c Hook
A Safe and Efficient Solution for Steel Coil Lifting
1. Product Introduction
The C-type coil hook is an ideal tool for lifting steel coils, primarily bearing shear forces. The length and opening of the C-type hook are determined based on the dimensions of the steel coil. The safety factor is high, and the operational temperature range is -20℃ to 45℃.
2. Performance Requirements
1.Main load-bearing components are made of Q345B low-alloy steel, with pins made of 40Cr.
2.Welding is performed using gas shielded welding, meeting JB928-67 standards.
3.The surface paint color of the lifting tool is light yellow for clear visibility.
4.The C-type hook must not exhibit unsafe tilt angles during lifting.
5.Simple structure, no power source required, easy to operate, and highly practical.
3. Manufacturing Process
The main steel structure components are rust-proofed and painted, with a total coating thickness of ≥120μm. All welding processes must comply with national standards, with strict inspections during manufacturing to ensure quality.
4. Usage Method
1.Attach the crane hook to the lifting ear of the C-type lifting tool and insert it into the coil before lifting horizontally.
2.Place the lifted steel coil at the designated location, ensuring the arc plate can be smoothly withdrawn.
3.If the arc plate is difficult to insert, designate a person to assist in the operation.
5. Precautions
1.Understand the safety operating procedures for lifting tools.
2.Ensure the load does not exceed the rated limit and is balanced during lifting.
3.Check the appearance of the lifting tool for defects before each use.
4.Do not arbitrarily change the structure of the lifting tool.
5.Control the lifting speed to prevent load movement.
6.Ensure the lifting mouth is slightly upward to prevent slipping.
7.Store in a dry environment and repaint any chipped areas.
8.Inspect all components before each use and promptly scrap if they reach the scrapping standard.
9.Must be operated by designated personnel familiar with safety procedures.
6. Inspection and Maintenance
1.Regular inspections should be conducted weekly, with monthly checks for thoroughness.
2.Replace hooks with defects or wear exceeding 3% immediately.
3.The warranty period is twelve months under normal usage conditions.
Choose our C-type lifting tool to ensure safety and efficiency!
By using and maintaining the C-type lifting tool, you will provide strong support for your work. Contact us now to learn more about our products and services to enhance your operational efficiency!
